blast furnace slag

blast furnace slag

Ground Granulated Blast Furnace (GGBF) Slag Used in ...

Blast furnace slag is nonreactive in a high alkali environment, such as concrete and soils. Blast furnace slag concrete can be reliably pumped when the slag is supplied to the ready-mix production in a saturated condition. Use of the cementatious properties of ground granulated blast furnace (GGBF) slag was reported as early as 1774. GGBF slag ...

3 X 1 Blast Furnace Slag | Edw. C. Levy Co.

3X1 Blast Furnace Slag is produced to commercial requirements. Usage Guide: When used as a structural or stabilizing fill, the 3X1 Blast Furnace Slag should be placed on the prepared ground in lifts not exceeding 8" (200mm). The total thickness of the 3X1 Blast Furnace Slag needed will depend on the ground conditions and the design loadings.

Use of Blast Furnace Slag Aggregate in Concrete - IJSER

Use of Blast Furnace Slag Aggregate in Concrete K.G. Hiraskar and Chetan Patil Abstract-The Iron industries produce a huge quantity of blast furnace slag as by–product, which is a non–biodegradable waste material from that only a small percentage of it is used by …

Blast Furnance Slag - User Guideline - Portland Cement ...

Pelletized blast furnace slag, in contrast to air-cooled and expanded blast furnace slag, has a relatively smooth texture and rounded shape. Grinding reduces the particle size to a cement fineness for use as a hydraulic cement, which is typically less than 3500 cm 2 /g. (8)

Blast Furnace (Railcraft) - Official Feed The Beast Wiki

The Blast Furnace is a multiblock structure added by Railcraft. This structure is used to turn Iron into Steel. The Blast Furnace will only take Coal Coke, Charcoal, and Thaumcraft Alumentum as fuels, requiring 1 Coal Coke per Ingot, 0.5 Alumentum per Ingot, 2 Coal per Ingot, or 4 Charcoal per Ingot. Construction [edit | edit source]

Blast Furnace Slag | National Slag Association

Blast Furnace Slag is formed when iron ore or iron pellets, coke and a flux (either limestone or dolomite) are melted together in a blast furnace.When the metallurgical smelting process is complete, the lime in the flux has been chemically combined with the aluminates and silicates of the ore and coke ash to form a non-metallic product called blast furnace slag.

30A Blast Furnace Slag | Edw. C. Levy Co.

30A Blast Furnace Slag conforms to all the requirements of the Edw. C. Levy Co. specifications for 30A Blast Furnace Slag Usage Guide: The 30A Blast Furnace Slag should be placed 4″ to 12″ thick depending upon ground conditions and design loadings, in lifts not exceeding 8″.

Iron and Steel Slag Statistics and Information - usgs.gov

In the production of iron, the blast furnace is charged with iron ore, fluxing agents, usually limestone and dolomite, and coke as fuel and the reducing agent. The iron ore is a mixture of iron oxides, silica, and alumina. From this and the added fluxing agents molten slag and iron are formed.

Ground granulated blast-furnace slag - Wikipedia

Granulated Blast Furnace Slag. Granulated blast furnace slag is a glassy granular material that varies, depending on the chemical composition and method of production, from a coarse, popcornlike friable structure greater than 4.75 mm (No. 4 sieve) in diameter to dense, sand-size grains passing a …

LEGO IDEAS - Product Ideas - Blast Furnace

I built a big blast furnace a while ago, based on Landschaftspark Duisburg-Nord (Germany) and Horno Alto 1 de Altos Hornos de Vizcaya (Spain), and quite a few people asked for instructions to build it. That model has about 13k bricks, far too much for LEGO Ideas, so I decided to make a smaller ...

Effects of Ground Granulated Blast Furnace Slag in ...

Slag cement is often referred to as "ground granulated blast-furnace slag" (GGBFS). As requested in 2001 by slag cement manufacturers and the Slag Cement Association, the American Concrete Institute officially reviewed and changed the terminology from GGBFS to slag cement (ACI Committee 233, 2004).

GROUND GRANULATED BLAST FURNACE SLAG

Ground granulated blast furnace slag (GGBFS) is designated in ASTM C 989 and consists mainly of silicates and aluminosilicates of calcium. GGBFS is divided into three classifications based on its activity index. Grade 80 has a low activity index and is used primarily in mass structures because it generates less heat than portland cement.

blast furnace slag, blast furnace slag Suppliers and ...

Blast furnace slag powder is widely used in cement production and concrete making; it can reduce the hydration heat of concrete, increase the later strength, and improve the microstructure of concrete, reinforcement aggregate rate of the bonding interface. 30days, 60days and 90days deferred L/C is also acceptable, the deferred L/C should be ...

Ground Granulated Blast Furnace Slag in Concrete and its ...

The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree ...

Blast furnace - Simple English Wikipedia, the free ...

A blast furnace is a special type of furnace for smelting iron from ore. Blast furnaces are very large. They can be up to 60 metres (200 ft) tall and 15 metres (49 ft) in diameter. The blast furnace is the biggest chemical reactor. Blast furnaces are also called high ovens.

Blast Furnace Slag - Material Description - RMRC

Blast Furnace Slag - Material Description ORIGIN In the production of iron, iron ore, iron scrap, and fluxes (limestone and/or dolomite) are charged into a blast furnace along with coke for fuel. The coke is combusted to produce carbon monoxide, which reduces the iron ore to a molten iron product.

ASTM C989 / C989M - 18a Standard Specification for Slag ...

This specification covers three strength grades of finely ground granulated blast-furnace slag (Grades 80, 100, and 120) for use as a cementitious material in concrete and mortars. The slag shall contain no additions and shall conform to the sulfide sulfur and sulfate chemical composition requirement.

Blast furnace slag granulation | ClimateTechWiki

Blast furnace slag (BFS, see Wikipedia ground granulated blast-furnace slag) is a nonmetallic byproduct of the manufacture of pig iron in a blast furnace. BFS consists primarily of silicates, aluminosilicates, and calcium-alumina-silicates. BFS forms when slagging agents (e.g., iron ore, coke ash, and limestone) are added to the iron ore to ...

Blast-furnace slag | Article about blast-furnace slag by ...

In addition to cement, the inquiry concerns cement-based products (eg ready-mix concrete) and other materials used to produce cement-based products (eg clinker, aggregates, blast-furnace slag, granulated blast-furnace slag, ground granulated blast-furnace slag, etc).

Blast furnace | metallurgy | Britannica.com

Blast furnace, a vertical shaft furnace that produces liquid metals by the reaction of a flow of air introduced under pressure into the bottom of the furnace with a mixture of metallic ore, coke, and flux fed into the top. Blast furnaces are used to produce pig iron from iron ore for subsequent

Slag Cement Benefits and Use in Concrete

Slag Cement Benefits and Use in Concrete Slag cement is a hydraulic cement formed when granulated blast furnace slag (GGBFS) is ground to suitable fineness and is used to replace a portion of portland cement. It is a recovered industrial by-product of an iron blast furnace. Molten slag diverted from the iron blast furnace is rapidly chilled ...

"Ground Granulated Blast Slag (GGBS) In Concrete – A Review"

Ground Granulated Blast furnace Slag (GGBS)[1] is a by product from the blast furnaces used to make iron. These operate at a temperature of about 1500 degrees centigrade and are fed with a carefully controlled mixture of iron ore, coke and limestone. The iron ore is reduced to iron and the remaining materials from a slag

Tarmac | Blast Furnace Slag

The rapid cooling of molten slag by large quantities of water produces sand-like granule aggregate. Primarily ground into a cement replacement known as ground granulated blast furnace slag (GGBS) this is used in ready-mixed and precast concrete and masonry, floor levelling compounds and high temperature resistant building products.

Characteristics and applications of iron and steel slag ...

Granulated blast furnace slag Just like air-cooled blast furnace slag, this slag has a hydraulic property and there is no risk of alkali-aggregate reaction. Because of the powerful latent hydraulic property that results from fine grinding, this slag is used in products such as Portland blast furnace slag cement.

Tarmac | Slag Aggregates

In concrete, processed steel and blast furnace slag provide a sustainable alternative to primary aggregates in the production of lightweight or dense ready-mixed concrete. Blast furnace slag can also be used to make Ground Granulated Blast-furnace Slag (GGBS) which is used as a cement replacement in concrete.

Ground Granulated Blast Furnace Slag - an overview ...

The grade of a ground granulated blast-furnace slag is based on its activity index, which is the ratio of the compressive strength of a mortar cube made with a 50% ground granulated blast-furnace slag-cement blend to that of a mortar cube made with a reference cement.

What is Slag Cement

Slag cement is a hydraulic cement formed when granulated blast furnace slag (GGBFS) is ground to suitable fineness and is used to replace a portion of portland cement. It is a recovered industrial by-product of an iron blast furnace. Molten slag diverted from the iron blast furnace is rapidly chilled, producing glassy granules that yield ...

Ground Granulated Blast Furnace Slag (GGBS) | Chemical ...

May 09, 2018· The importance of Ground Granulated Blast Furnace Slag (GGBS) lies in its greener way to become a substitute in concrete material. GGBS being a waste material, it needs proper method for disposal. So incorporating this waste material in concrete can reduce the depletion of conventional concrete components

Common Uses for Slag | National Slag Association

Electric Arc Furnace Slag (EAF or steel furnace slag) Produced when scrap metal and fluxes are oxidized by the use of an electric current. Molten slag is generally placed into ground bays for cooling. Both BOF and EAF slags are somewhat heavier than Blast Furnace Slag and most quarried rock material. Uses include

Special Wastes | Hazardous Waste | US EPA

Slag tailings from primary copper processing. Flurogypsum from hydrofluoric acid production. Process wastewater from hydrofluoric acid production. Air pollution control dust/sludge from iron blast furnaces. Iron blast furnace slag. Treated residue from roasting/leaching of chrome ore